The thermal insulation layer of Organic Brake pads is composed of materials that do not transfer heat, and its purpose is to insulate. The friction block is composed of friction material and adhesive, and it is squeezed on the brake disc or brake drum to generate friction during braking, to achieve

Ceramic Brake pads have very low thermal attenuation. Despite the first-generation ceramic merchandise of M09 material or the fourth-generation Ceramic restraint of TD58, it will still make sure that the vehicle includes a smart braking performance to make sure safety, and therefore the thermal attenuation of the restraint is tiny. Next, let's take a look at the performance of Ceramic Brake pads. Here are some answers.

Generally, it is composed of a steel plate, adhesive heat insulation layer, and friction block. The steel plate must be painted to prevent rust. During the coating process, a furnace temperature tracker is used to detect the temperature distribution of the coating process to ensure quality. So what is the process design of Organic Brake pads? Let's take a look together next.

How to replace Non-asbestos Brake pads?The friction block is composed of friction material and adhesive. It is squeezed on the brake disc and the brake drum to generate friction during braking, to achieve the purpose of vehicle deceleration and braking.

Material composition and function of Ceramic Brake padsBrakes are an important guarantee for vehicle travel. The long-term use of ordinary brakes will have a layer of enamel inside which can easily cause the vehicle to fail to stop, the brakes have abnormal noises, etc..

Brake drums are equipped with brake shoes, however, most of the people sit down with constraint as constraint and brake shoes. Therefore, "disc brake pads" are used to specify that the brake pads are installed on the disc brake, not the brake disc.