Views: 19 Author: Site Editor Publish Time: 2023-05-09 Origin: Site
Automobile brake linings, commonly known as brake pads, are important safety components of the automobile brake system. Therefore, the braking effect is reflected by the brake pads. The quality of Semi-metallic Brake pads directly affects the braking performance of the automobile. To the safety of the life and property of the drivers and passengers of the car. Next, let's take a look at how to prevent excessive wear of Semi-metallic Brake pads and how to purchase Semi-metallic Brake pads. Here are some answers.
How to prevent excessive wear of Semi-metallic Brake pads?
How to buy Semi-metallic Brake pads.
First, in the process of continuing to descend steep slopes, lower the vehicle speed in advance, use appropriate gears, and adopt the operation mode of engine brake and brake system, which can effectively reduce the burden on the brake system and avoid overheating of the brake system. Second, it is forbidden to turn off the engine during the downhill process. Cars are equipped with a brake vacuum booster pump. Once the engine is turned off, the brake booster pump will not only fail to assist but will also cause great resistance to the brake master cylinder. The distance will increase exponentially. Third, when an automatic transmission vehicle is driving in an urban area, the fuel must be collected in time regardless of whether it is fast or slow. If the brake is applied only when the vehicle is very close to the vehicle in front, the Semi-metallic Brake pads will be worn badly and will be very fuel-intensive. Therefore, when an automatic transmission vehicle sees a red light or is congested ahead, it must pay off in advance, which not only saves fuel, saves maintenance costs, but also increases driving comfort. Fourth, when driving at night, when driving from a bright place to a dark place, the eyes need to adapt to changes in light. To ensure safety, the speed of the vehicle must be reduced. In addition, when driving through bends, slopes, bridges, narrow roads, and places that are not easy to see, you should reduce the speed of the vehicle and be prepared to brake or stop at any time to prevent unexpected accidents and ensure driving safety.
First of all, look at the friction coefficient. The friction coefficient determines the basic braking torque of the brake pads. Too high will cause the wheels to lock, lose control of the direction and burn the pads during the braking process. If it is too low, the braking distance will be too long. Second, it depends on safety. Semi-metallic Brake pads will generate instantaneous high temperature during braking, especially during high-speed driving or emergency braking, the friction coefficient of the friction lining will decrease under high-temperature conditions. Third, look at whether it is comfortable, including braking sensation, noise, dust, smoke, odor, etc. Which are a direct manifestation of friction performance. Four looks at the service life, usually, Semi-metallic Brake pads can guarantee a service life of 30,000 kilometers. Fifth, you should choose automobile brake pads produced by regular manufacturers, with license numbers, designated friction coefficients, implementation standards, etc. And there should be a certificate of conformity, production batch number, production date in the box. Sixth, choose a professional repair point to ask a professional to install it.
Our official website is https://www.ifkbrakes.com/. If you are interested in our Semi-metallic Brake pads products or have other needs, please feel free to contact us. Our cost-effective products will bring you a better experience.